Este mezclador de Audio Developments ha sido diseñado para toda variedad de aplicaciones, sin embargo, su pequeño tamaño (13.5×9.5×4.0cm) y bajo peso (400gm), se presta a ser montado en una cámara o en un cinturón. Cuenta con 3 entradas y dos salidas con limitadores y existen dos configuraciones: un micrófono y dos entradas de línea o tres entradas de micrófono.
CARACTERÍSTICAS:
MIC INPUTS – One or three electronically balanced type with XLR connector, 48V phantom power, high-pass filter, gain control and mic or line input selection.
LINE INPUT – Instrumentation grade electronically balanced with gain/level control.
ROUTING – Each input is routed to left, right or left and right by two toggle switches.
OUTPUTS – Electronically balanced with XLR type connectors and stereo rotary level control. Can be unbalanced without loss of level or degradation of quality. A push-button switch selects line or microphone output levels to the XLR connectors. A 3.5mm jack socket carries output signals at microphone level.
LIMITERS – Incorporated in the microphone inputs and the two main outputs. The microphone input limiter is permanently in circuit. A push-button switch introduces the output limiters into circuit and two LEDs indicate the onset of limiting.
LINE-UP OSCILLATOR – 1kHz tone injected into outputs.
MONITORING – Headphone output on 3.5mm jack socket with a push-button switch selecting the direct or return signals. The return signals are brought in on a 3.5mm stereo jack.
METERING – Two LED ladders indicate output level
POWERING – Either external power, via a 4 pin Hirose connector, or a separate PP3 9V battery pack can be used to power the mixer. An LED indicates power present and flashes when the voltage is too low
